A cabinet shown against a straight wall line may stand away from the real wall because the skirting projects into its base area. The top then sits forward too, even though its depth matches the drawing.
The useful question is not just whether the cabinet fits the wall length. It is which part of the furniture meets which finished building surface.
Measure the profile, not only the projection
Record the skirting's height, projection and shape at the intended position. Include relevant steps, trims or wall irregularities. Mark dimensions as measured or provisional; obtain final site information from the responsible team.
Draw a side section through the furniture and finished wall. An overall room plan may show the projection but miss the height at which it affects a plinth, rear leg or body panel.
Choose the placement before redesigning the base
The Slatted Sideboard includes plinth proportion in its project review. The Fluted Cabinet shows a metal-base direction whose final structure still requires approval. Neither silhouette tells you whether the actual base will clear the site's skirting.
Possible proposals include an agreed stand-off from the wall or an approved construction detail that accommodates the profile. These are alternatives to assess, not instructions to notch a cabinet or remove building trim on site. Record who must approve the building and furniture changes, if any.
Keep three distances separate
| Distance or relationship | Where to show it | Why it matters |
|---|---|---|
| Wall to rear-most furniture part | Side section at the affected height | Identifies the actual contact or offset |
| Wall to tabletop or cabinet top | Section through the top | Makes any visible gap explicit |
| Front of furniture to neighboring use area | Furnished room plan | Shows the remaining opening and circulation space |
Moving the whole cabinet forward changes more than the rear gap. Recheck doors, drawers, nearby seating and the intended front alignment. Do not approve the new placement by its rear view alone.
Coordinate required fixing with the offset
Where the approved product requires restraint or attachment, the fixing proposal needs to suit the final furniture position and actual building conditions. Have the supplier and responsible installer resolve that relationship. A gap behind the furniture is not permission to omit required fixing or improvise a spacer.
Use the drawing handover record to keep the measured wall profile and revised cabinet proposal together. Discuss the cabinet-to-wall fit with a side section, site information and the chosen product reference. Final offsets, construction, installation and required clearances remain project decisions.